The length of the elements of wall panels made of wood

The length of the elements of wall panels made of wood

Panels – solid wood boards, the so-called. paneling slats, they can be laid lengthwise in three ways:

• in full lengths, without cutting out (drawing),

Ceiling lining made of slats in full lengths.

• in solids (modular) lengths with staggered joints (drawing),

Floor covering made of slats of equal length, alternately connected.

• • in various lengths with a random link (drawing).

Floor covering made of slats of various lengths joined randomly.

Cladding the ceiling with full-length wainscot boards is convenient, but rarely achievable in practice. With coniferous wood: larch, a pine tree, spruce, daglesji, sometimes it is successful, while for deciduous species: oak, ash, robins, in elm and birch it is practically unattainable due to the common defects of wood. One major defect in the length of the board 3 or 4 m eliminates it practically from use in its entirety.

Choice of the same, the fixed length of boards with regular change of joints causes the formation of numerous, useless waste.

Planks of irregular length, However, not shorter than 40 cm, which occur as a result of removing defects are the best lining material from the point of view of using the raw material. Also cutting boards at the wall is much easier in this method of lining than the two previously discussed.

A constant modulus of length is easily achieved with veneered elements. The length module is then chosen to be such, so that it is a multiple of the dimensions of the lined surface.